Ace Hydraulic Pump FMCSC-205F-HYD-304

Description

Suction 300 Series Standard Port Flange
Discharge 220 Series Full Port Flange
Recommended for use on the following Hydraulic Systems: Pressure Compensating Closed Center; Load Sensing or Pressure Flow Compensating Closed Center; Open Center from 10 to 20 GPM
304 motor requires 13 GPM hydraulic flow
Integral Needle Valve bypasses up to 9 GPM on Open Center Systems
Type 2106 Silicon Carbide Mechanical Seal for Improved Survivability
Chemical Resistant Valox Impeller
Cast Iron Pump
Stainless Steel Shaft and Wear Ring
Larger 203 Bearings for Longer Life
Maximum Gallons Per Minute – 240 GPM

Maximum PSI – 120 PSI

Do Not Run Dry – Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period.

Do Not Run With Flow Shutoff For Extended Periods – Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications

PART SCHEMATICS