GE-75-HONDA

Description

Suction 1″ Female Pipe Thread
Discharge 3/4″ Female Pipe Thread
All Polypropylene corrosion resistant construction
Tall Blade Impeller design – higher pressure at standard engine speeds
Impeller attaches directly to 5/8″ keyed shaft engine
Maximum Gallons Per Minute – 25 GPM

Maximum PSI – 70 PSI

Do Not Run Dry – Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period.

Do Not Run With Flow Shutoff For Extended Periods – Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications