GE-660-HONDA

Description

Suction 1-1/2″ Female Pipe Thread
Discharge 1-1/4″ Female Pipe Thread
Impeller attaches directly to 3/4″ keyed shaft on 5.5 HP Honda
Stainless steel shaft sleeve with o-ring leak protection
All iron construction
Maximum Gallons Per Minute – 110 GPM

Maximum PSI – 120 PSI

Do Not Run Dry – Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period.

Do Not Run With Flow Shutoff For Extended Periods – Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications