Ace Pump FMC-650-HYD

Description

Suction 1-1/2″ Female Pipe Thread
Discharge 1-1/4″ Female Pipe Thread
Modified Impeller Design for Higher Pressure at Lower RPM
Operates at Lower RPM for Longer Life
Oversized Bearings
E-coat Corrosion Protection
Stainless Steel Shaft with Splined Motor Connection
High Efficiency 4000 PSI Pressure Plated Gear Motor
Maximum Gallons Per Minute – 140 GPM

Maximum PSI – 160 PSI

Do Not Run Dry – Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period.

Do Not Run With Flow Shutoff For Extended Periods – Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications

PART SCHEMATICS